Olympus (SHVSS) Single High Voltage Cable Cleat

CMP OLYMPUS single cable cleat is a composite cable cleat which has been designed, constructed and tested in accordance with the International Standard ‘cable cleats for electrical installations’ IEC 61914:2015 to ensure the securing and retention of cables, without sustaining damage.

The stainless steel section of this cable cleat can be optionally coated with an extremely high performance UL94 V0 flame retardant. This low toxicity polymer alloy coating is halogen free polymer and low smoke & fume, whilst being resistant to: impact, abrasion, salt spray, chemical attack, weathering & UV, making it perfectly suited for use in rail applications.

OLYMPUS cable cleats are designed to be installed as a system for use with High Voltage cable installations and can be manufactured in a standard set of cable diameter range or to suit specific project parameters.

Fabricated in non-magnetic 316L stainless steel, giving it high creep strength whilst providing excellent corrosion resistance in the harshest environments.

Flame retardant low smoke and fume, zero halogen(FR LSF/LSOH) polymeric fixed liners are fitted as standard, helping to:

• Restrain the cables within vertical applications.
• Provide a layer of protection to both the cable sheath and
  the cable cleat, during normal operation where thermal
  elongation of cable occurs.
• Protect the cable from chafing on any mounting surface
  due to differential movements, such as those found in
  marine and offshore applications.
• Assist in the extra protection of cables in the event of
  short circuit fault conditions

Features

• Third party tested in accordance with IEC 61914:2015
• Available in 316L stainless steel
• Sunlight (UV) resistant
• Operating temperature -50°C to +60°C
• Excellent axial and lateral load retention