Воспользуйтесь нашим инструментом для поиска

Наш инструмент расширенного поиска позволяет найти продукцию, в точности соответствующую вашим требованиям.

Выберите один или несколько фильтров Закрыть [ X ]

Профессионалы в сфере проектирования и изготовления кабельных вводов, кабельных скоб и аксессуаров

Позвонить нам

оронавирус COVID–19: Информация для клиентов касательно коронавируса COVID-19

Хотите узнать больше об этом изделии у технического специалиста CMP? Позвоните одному из них прямо сейчас по телефону

Ex db
Ex eb

E1FW/MF | Ex e, Ex d | Explosive Atmosphere Cable GlandFor all types Steel & Aluminium Wire Armoured Cables

Узнать больше о
данном изделии

Описание

Технические сведения

Mining, Internationally Approved, Flanged Explosive Atmosphere Cable Gland

• High quality durable materials
• Wide sealing range for each cable gland size
• Fully sequential, three step installation procedure
• Reduces subjectivity of installations
• Complete with flanged adaptor
• Metal-to-metal armour clamping
• Direct & remote installation
• Displacement type flameproof inner seal
• Controlled outer ‘load retention’ seal
• Unique OSTG prevents overtightening
• -60˚C to +130˚C
• Permitted in Zone 1
• Internationally marked, IECEx & ATEX
• EMC tested

See MA/FT, MA/B page for flange mounting dimensions
Alternative flange sizes available upon request

	BS 6121:Part 1:1989, IEC 62444, EN 62444
	Impact = Level 8, Retention = Class D
	IK10 to IEC 62262 (20 joules) Brass & Stainless Steel only
	Category B
	CML 18ATEX1324X, CML 18ATEX1332U
	IM2 Ex d I Mb, Ex e I Mb
	EN60079-0,1,7
	IECEx CML 18.0181X, IECEx CML 18.0189U, IECEx SIM 14.0007X
	Ex d I Mb, Ex e I Mb
	IEC 60079-0,1,7
	IP66
	Brass, Electroless Nickel Plated Brass
	CMP SOLO LSF Halogen Free Thermoset Elastomer
	Single Wire Armour (SWA), Aluminium Wire Armour (AWA)
	Detachable Armour Cone & AnyWay Universal Clamping Ring
	CMP Inner Displacement Seal & Unique CMP ‘LRS’ ™ Outer Load Retention Seal
	Cable Inner Bedding & Outer Cable Sheath

Note : * Mechanical & Electrical Classifications applied as per IEC 62444 & EN 62444
** Refer to Maintaining a Seal for further information on Ingress Protection Ratings

Certificates

Таблица выбора продукции

Нажмите здесь чтобы ознакомиться с технической иллюстрацией

Техническая иллюстрация

Нажмите здесь чтобы просмотреть информацию о заказе

На изображении:

Cable Gland Size	Minimum Spigot Length "E"	Spigot Diameter "C"	Cable Bedding Diameter "A"		Overall Cable Diameter "B"		Armour Range		Across Flats "D"	Across Corners "D"	Protrusion Length "F"	Combined Ordering Reference (*Brass Metric)			Cable Gland Weight (ozs)
Cable Gland Size	Minimum Spigot Length "E"	Spigot Diameter "C"	Min	Max	Min	Max	Min	Max	Max	Max	Protrusion Length "F"	Size	Type	Ordering Suffix	Cable Gland Weight (ozs)
20S	0.591	0.748	0.240	0.457	0.374	0.626	0.031	0.049	0.945	1.039	3.272	20S	E1FW	1RA/MF	0.302
20	0.591	0.748	0.256	0.547	0.492	0.823	0.031	0.049	1.201	1.323	3.547	20	E1FW	1RA/MF	0.361
25S	0.591	1.000	0.437	0.783	0.551	0.866	0.049	0.063	1.476	1.626	4.315	25S	E1FW	1RA/MF	0.575
25	0.591	1.000	0.437	0.783	0.717	1.031	0.049	0.063	1.476	1.626	4.315	25	E1FW	1RA/MF	0.572
32	0.591	1.252	0.669	1.031	0.933	1.335	0.063	0.079	1.811	1.992	4.220	32	E1FW	1RA/MF	0.745
40	0.591	1.500	0.866	1.264	1.098	1.591	0.063	0.079	2.165	2.382	4.634	40	E1FW	1RA/MF	1.015
50S	0.591	2.000	1.161	1.500	1.386	1.839	0.079	0.098	2.362	2.598	4.752	50S	E1FW	1RA/MF	1.478
50	0.591	2.000	1.402	1.732	1.591	2.087	0.079	0.098	2.760	3.035	4.909	50	E1FW	1RA/MF	1.683
63S	0.591	2.500	1.579	1.965	1.795	2.339	0.079	0.098	2.953	3.248	4.862	63S	E1FW	1RA/MF	2.109
63	0.591	2.500	1.858	2.201	2.150	2.591	0.079	0.098	3.150	3.465	4.862	63	E1FW	1RA/MF	2.149
75S	0.591	3.000	2.079	2.437	2.323	2.835	0.098	0.118	3.504	3.854	5.594	75S	E1FW	1RA/MF	3.664
75	0.591	3.000	2.327	2.673	2.626	3.087	0.098	0.118	3.898	4.287	5.689	75	E1FW	1RA/MF	3.978
DIMENSIONS ARE DISPLAYED IN INCHES UNLESS OTHERWISE STATED

Cable Gland Size	Minimum Spigot Length "E"	Spigot Diameter "C"	Cable Bedding Diameter "A"		Overall Cable Diameter "B"		Armour Range		Across Flats "D"	Across Corners "D"	Protrusion Length "F"	Combined Ordering Reference (*Brass Metric)			Cable Gland Weight (Kgs)
Cable Gland Size	Minimum Spigot Length "E"	Spigot Diameter "C"	Min	Max	Min	Max	Min	Max	Max	Max	Protrusion Length "F"	Size	Type	Ordering Suffix	Cable Gland Weight (Kgs)
20S	15.0	19.0	6.1	11.6	9.5	15.9	0.8	1.25	24.0	26.4	83.1	20S	E1FW	1RA/MF	0.302
20	15.0	19.0	6.5	13.9	12.5	20.9	0.8	1.25	30.5	33.6	90.1	20	E1FW	1RA/MF	0.361
25S	15.0	25.4	11.1	19.9	14.0	22.0	1.25	1.6	37.5	41.3	109.6	25S	E1FW	1RA/MF	0.575
25	15.0	25.4	11.1	19.9	18.2	26.2	1.25	1.6	37.5	41.3	109.6	25	E1FW	1RA/MF	0.572
32	15.0	31.8	17.0	26.2	23.7	33.9	1.6	2.0	46.0	50.6	107.2	32	E1FW	1RA/MF	0.745
40	15.0	38.1	22.0	32.1	27.9	40.4	1.6	2.0	55.0	60.5	117.7	40	E1FW	1RA/MF	1.015
50S	15.0	50.8	29.5	38.1	35.2	46.7	2.0	2.5	60.0	66.0	120.7	50S	E1FW	1RA/MF	1.478
50	15.0	50.8	35.6	44.0	40.4	53.0	2.0	2.5	70.1	77.1	124.7	50	E1FW	1RA/MF	1.683
63S	15.0	63.5	40.1	49.9	45.6	59.4	2.0	2.5	75.0	82.5	123.5	63S	E1FW	1RA/MF	2.109
63	15.0	63.5	47.2	55.9	54.6	65.8	2.0	2.5	80.0	88.0	123.5	63	E1FW	1RA/MF	2.149
75S	15.0	76.2	52.8	61.9	59.0	72.0	2.5	3.0	89.0	97.9	142.1	75S	E1FW	1RA/MF	3.664
75	15.0	76.2	59.1	67.9	66.7	78.4	2.5	3.0	99.0	108.9	144.5	75	E1FW	1RA/MF	3.978
DIMENSIONS ARE DISPLAYED IN MILLIMETRES UNLESS OTHERWISE STATED