EN RU CN

Воспользуйтесь нашим инструментом для поиска

Наш инструмент расширенного поиска позволяет найти продукцию, в точности соответствующую вашим требованиям.

оронавирус COVID–19: Информация для клиентов касательно коронавируса COVID-19

Triton CDS PB (T3CDSPB) | Ex e, E x d, Ex nR, Ex ta | Explosive Atmosphere Cable GlandFor all types of Lead Sheathed Armoured Cables

Globally Approved, Explosive Atmosphere Cable Gland

• Effectively earths / grounds lead sheathed cables
• Fully sequential, three step installation procedure
• Direct & remote installation
• Unique compensating displacement seal system (CDS)
– Metal-to-metal installation every time regardless of lead sheath diameter
• Designed to prevent Coldflow
• Integral protected deluge seal
• Controlled outer ‘load retention’ seal
• Unique OSTG prevents overtightening
• -60˚C to +130˚C
• Globally marked, IECEx, ATEX, UL & cCSAus
• EMC tested

† Grooved Cone (X) is predominantly used for Wire Braid (e.g. GSWB, TCWB), Steel Tape Armour (STA, DSTA) and Aluminium Strip Armour (ASA) but is also suitable for Single Wire Armour (SWA), Aluminium Wire Armour (AWA) and Pliable Wire Armour (PWA) if the range is outside that of the Stepped Cone (W).

Note: Grooved Cone (X) dimensions shown in the Cable Gland Selection Table below are for a double wire strand of braid armour cables. Tapes can also be doubled over. For cables that have only a single layer of armour such as SWA the clamping range should be used as shown in the table below. Stepped (W) Cone is suitable for Single Wire Armour (SWA), or Aluminium Wire Armour (AWA) cables

BS 6121:Part 1:1989, IEC 62444, EN 62444
Impact = Level 8, Retention = Class D
IK10 to IEC 62262 (20 joules) Brass & Stainless Steel only
Category B (Category A when used with braid, tape or pliable wire armour cables)
CML 18ATEX1326X
CML 18ATEX4318X
II 2G,II 1D, Ex d IIC Gb, Ex e IIC Gb, Ex ta IIIC Da,
II 3G Ex nR IIC Gc, I M2, Ex d I Mb, Ex e I Mb
EN60079-0,1,7,15,31
IECEx CML 18.0183X
IECEx SIM 14.0007X
Ex d IIC Gb, Ex e IIC Gb, Ex nR IIC Gc, Ex ta IIIC Da, Ex d I Mb, Ex e I Mb
IEC 60079-0,1,7,15,31
TC RU C-GB.ГБ05.B00138
GYJ13.1141X , GYJ13.1283X
P444949
TÜV 11.0374X
03866
LRS: 01/00172 (E3), DNV: E-13848, ABS: 14-LD234401A-4-PDA
IP66, IP67 & IP68
DTS01 : 91
Brass, Electroless Nickel Plated Brass, Aluminium, Stainless Steel
CMP SOLO LSF Halogen Free Thermoset Elastomer
Lead Sheathed & Single Wire Armour (LC/SWA), Lead Sheathed & Aluminium Wire Armour (LC/AWA), Lead Sheathed & Wire Braid Armour (LC/SWB), Lead Sheathed & Pliable Wire Armour (LC/PWA), Lead Sheathed & Steel Tape Armour (LC/STA), Lead Sheathed & Aluminium Strip Armour (LC/ASA)
Reversible Armour Cone & AnyWay Universal Clamping Ring
Inner Bedding Sealing Ring: Compensating Displacement Seal (CDS), Outer Sheath Sealing Ring : Load Retention Seal (LRS)
Cable Inner Bedding & Outer Cable Sheath

* Mechanical & Electrical Classifications applied as per IEC 62444 & EN 62444
** Refer to Maintaining a Seal for further information on Ingress Protection Ratings

Certificates

Нажмите здесь to view Certificates

Таблица выбора продукции

Нажмите здесь чтобы ознакомиться с технической иллюстрацией

Техническая иллюстрация

Нажмите здесь чтобы просмотреть информацию о заказе

Cable Gland SizeAvailable Entry Threads “"C"” (Alternate Metric Thread Lengths Available)Lead Sheath Diameter “"A"”Overall
Cable
Diameter
“"B”"
Armour Range †Across
Flats
"“D”"
Across
Corners
“"D”"
Protrusion
Length “"F”"
Combined Ordering Reference
(Brass Metric)
ShroudCable
Gland
Weight
(Ozs)
MetricThread Length (Metric) “"E"”NPTThread Length
(NPT) "“E"”
NPTMinMaxMinMaxMaxMaxSizeTypeOrdering
Suffix
StandardOptionGrooved
Cone (X)
Stepped Cone (W)
Dimensions are displayed in inches unless otherwise stated
130M1300.9455”"1.8436”"3.8194.3354.3394.8500.0310.0630.1240.1576.1816.7996.823130T3CDSPB1RALSF35346.038
115M1150.9454”"1.7325”"3.3863.7053.9964.3390.0310.0630.1240.1575.4335.9766.350115T3CDSPB1RALSF34273.374
100M1000.9453 1/2”"1.6854”"2.9923.4693.3903.9920.0310.0630.1240.1575.0005.5005.047100T3CDSPB1RALSF33176.017
90M900.9453 1/2”"1.6854”"2.6223.0353.0003.5550.0310.0630.1240.1574.5284.9805.46990T3CDSPB1RAPVC32172.490
75M750.5913”"1.6343 1/2”"2.3272.5672.6263.0870.0240.0630.0980.1183.9374.3314.73675T3CDSPB1RAPVC30117.815
75SM750.5912 1/2”"1.5713”"2.0792.3702.3232.8350.0240.0630.0790.0983.5433.8984.35475ST3CDSPB1RAPVC2891.007
63M630.5912 1/2"”1.5713”"1.8582.1342.1502.5910.0240.0630.0790.0983.1503.4654.15063T3CDSPB1RAPVC2563.140
63SM630.5912”"1.0592 1/2”"1.5791.9091.7952.3390.0240.0630.0790.0982.9533.2484.03563ST3CDSPB1RAPVC2361.377
50M500.5912”"1.0592 1/2”"1.4021.6771.5912.0870.0240.0630.0790.0982.7603.0354.16550T3CDSPB1RAPVC2156.791
50SM500.5911 1/2”"1.0282”"1.1611.4651.3861.8390.0160.0630.0790.0982.3622.5983.96550ST3CDSPB1RAPVC1839.860
40M400.5911 1/4”"1.0081 1/2”"0.8661.2281.0981.5910.0160.0630.0630.0792.1652.3823.66940T3CDSPB1RAPVC1532.099
32M320.5911”"0.9841 1/4”"0.6691.0040.9331.3350.0160.0470.0630.0791.8111.9923.57132T3CDSPB1RAPVC1122.575
25M250.5913/4”"0.7951”"0.4370.7600.7171.0310.0160.0470.0490.0631.4761.6263.49225T3CDSPB1RAPVC0915.521
25SM250.5913/4”"0.7951”"0.4370.7600.5510.8660.0160.0470.0490.0631.4761.6263.49625ST3CDSPB1RAPVC0915.521
20M200.5911/2”"0.7833/4”"0.2560.5280.4920.8230.0160.0390.0310.0491.2011.3233.00020T3CDSPB1RAPVC069.877
20s16M200.5911/2”"0.7833/4”"0.1220.3070.2400.5160.0120.0390.0310.0490.9451.0393.09820S16T3CDSPB1RAPVC367.055
20SM200.5911/2”"0.7833/4”"0.2400.4330.3740.6260.0120.0390.0310.0490.9451.0393.09820ST3CDSPB1RAPVC367.055
Cable Gland SizeAvailable Entry Threads “"C”" (Alternate Metric Thread Lengths Available)Lead Sheath Diameter "“A”"Overall
Cable
Diameter
“"B”"
Armour Range †Across
Flats
"“D”"
Across
Corners
"“D”"
Protrusion
Length “"F”"
Combined Ordering Reference
(Brass Metric)
ShroudCable
Gland
Weight
(Kgs)
StandardOptionGrooved
Cone (X)
Stepped Cone (W)
MetricThread Length (Metric) "“E”"NPTThread Length
(NPT) “"E”"
NPTMinMaxMinMaxMaxMaxSizeTypeOrdering
Suffix
20s16M2015.01/2”"19.93/4”"3.17.86.113.10.31.00.81.2524.026.478.720S16T3CDSPB1RAPVC360.200
20SM2015.01/2”"19.93/4”"6.111.09.515.90.31.00.81.2524.026.478.720ST3CDSPB1RAPVC360.200
20M2015.01/2”"19.93/4”"6.513.412.520.90.41.00.81.2530.533.676.220T3CDSPB1RAPVC060.280
25SM2515.03/4”"20.21”"11.119.314.022.00.41.21.251.637.541.388.825ST3CDSPB1RAPVC090.440
25M2515.03/4”"20.21”"11.119.318.226.20.41.21.251.637.541.388.725T3CDSPB1RAPVC090.440
32M3215.01”"25.01 1/4”"17.025.523.733.90.41.21.62.046.050.690.732T3CDSPB1RAPVC110.640
40M4015.01 1/4”"25.61 1/2”"22.031.227.940.40.41.61.62.055.060.593.240T3CDSPB1RAPVC150.910
50SM5015.01 1/2”"26.12”"29.537.235.246.70.41.62.02.560.066.0100.750ST3CDSPB1RAPVC181.130
50M5015.02”"26.92 1/2”"35.642.640.453.00.61.62.02.570.177.1105.850T3CDSPB1RAPVC211.610
63SM6315.02”"26.92 1/2”"40.148.545.659.40.61.62.02.575.082.5102.563ST3CDSPB1RAPVC231.740
63M6315.02 1/2”"39.93”"47.254.254.665.80.61.62.02.580.088.0105.463T3CDSPB1RAPVC251.790
75SM7515.02 1/2”"39.93”"52.860.259.072.00.61.62.02.590.099.0110.675ST3CDSPB1RAPVC282.580
75M7515.03”"41.53 1/2”"59.165.266.778.40.61.62.53.0100.0110.0120.375T3CDSPB1RAPVC303.340
90M9024.03 1/2”"42.84”"66.677.176.290.30.81.63.154.0115.0126.5138.990T3CDSPB1RAPVC324.890
100M10024.03 1/2”"42.84”"76.088.186.1101.40.81.63.154.0127.0139.7128.2100T3CDSPB1RALSF334.990
115M11524.04”"44.05”"86.094.1101.5110.20.81.63.154.0138.0151.8161.3115T3CDSPB1RALSF347.750
130M13024.05”"46.86”"97.0110.1110.2123.20.81.63.154.0157.0172.7173.3130T3CDSPB1RALSF359.810
Dimensions are displayed in millimetres unless otherwise stated