EN RU CN

Воспользуйтесь нашим инструментом для поиска

Наш инструмент расширенного поиска позволяет найти продукцию, в точности соответствующую вашим требованиям.

оронавирус COVID–19: Информация для клиентов касательно коронавируса COVID-19

PX2KREX | Ex e, Ex d, Ex nR, Ex ta | Explosive Atmosphere Barrier Cable GlandFor all types of Armoured Cables

Globally Approved, Explosive Atmosphere RapidEx Barrier Cable Gland

• RapidEx liquid pour sealing system
– Enhances reliability, reduces risk
– Reduces man hours
– Reduces cost
• Metal-to-metal armour clamping
• Direct & remote installation
• Integral protected deluge seal
• Controlled outer ‘load retention’ seal
• Unique OSTG prevents overtightening
• -60˚C to +85˚C
• Class I Zone 1, 21 and Zone 2, 22 Class I Division 1 & 2 ABCD
• Globally marked, IECEx, ATEX & cCSAus
• EMC tested

† Grooved Cone (X) is predominantly used for Wire Braid (e.g. GSWB, TCWB), Steel Tape Armour (STA, DSTA) and Aluminium Strip Armour (ASA) but is also suitable for Single Wire Armour (SWA), Aluminium Wire Armour (AWA) and Pliable Wire Armour (PWA) if the range is outside that of the Stepped Cone (W).

Note: Grooved Cone (X) dimensions shown in the Cable Gland Selection Table below are for a double wire strand of braid armour cables. Tapes can also be doubled over. For cables that have only a single layer of armour such as SWA the clamping range should be used as shown in the table below

Stepped (W) Cone is suitable for Single Wire Armour (SWA), or Aluminium Wire Armour (AWA) cables.

Выданные патенты: DE 2287986, ES 2287986, FR 2287986, IT 2287986, NL 2287986, NO 2287986, TR 2287986, AU 2010284848, AU 2014274614, CA 2771713, GB 2485114, MY 153846, SG 178839, US 8872027, US 9484133, US 9774178 

BS 6121:Part 1:1989, IEC 62444, EN 62444
Impact = Level 8, Retention = Class D
IK10 to IEC 62262 (20 joules) Brass & Stainless Steel only
Category B (Category A when used with braid, tape or pliable wire armour cables)
CML 18ATEX1325X, CML 18ATEX4317X
II 2G, II 1D, Ex d IIC Gb, Ex e IIC Gb, Ex ta IIIC Da
II 3G Ex nR IIC Gc, IM2 Ex d I Mb, Ex e I Mb
EN 60079-0,1,7,15,31
IECEx CML 18.0182X, IECEx SIM 14.0008X
Ex d IIC Gb, Ex e IIC Gb, Ex nR IIC Gc, Ex ta IIIC Da, Ex d I Mb, Ex e I Mb
IEC 60079-0,1,7,15,31
2288626
Class I, Div. 1, 2 Groups A, B, C and D; Class II, Div. 1, 2 Groups E, F and G; Class III, Div. 1,
2; Type 4X: Oil Resistant II:
Class I, Zone 1 AEx d IIC Gb, AEx e IIC Gb, Class I, Zone 2 AEx nR IIC Gc,
Class I, Zone 20 AEx ta IIIC Da
Class I, Div. 1, 2 Groups A, B, C and D; Class II, Div. 1, 2
Groups E, F and G; Class III, Div. 1, 2; Type 4X: Oil Resistant II:
Ex d IIC Gb, Ex e IIC Gb, Ex nR IIC Gc, Ex ta IIIC Da
CAN/CSA-C22.2 No 0,18,25,30,94,174, CAN/CSA-E60079-0,1,7,15,31 CAN/CSA-E61241-1-1 Part 1-1, ANSI/UL 514B Ed 5, ANSI/UL 50 Ed 11, ANSI/UL 2225 Ed 4, UL60079-0,1,7,15,31
TC RU C-GB.ГБ05.B00138
UA.TR.047.C.0644-15
P444949
GYJ13.1140X, GYJ13.1282X
TÜV 12.2073X
03866
LRS: 01/00172 (E3), DNV: E-13848, ABS: 14-LD234401A-4-PDA
IP66, IP67 & IP68
DTS01 : 91
Brass, Electroless Nickel Plated Brass, Stainless Steel, Aluminium
CMP SOLO LSF Halogen Free Thermoset Elastomer / RapidEx Resin Barrier
Single Wire Armour (SWA), Aluminium Wire Armour (AWA), Wire Braid Armour (e.g.
SWB), Screened Flexible (EMC) Wire Braid (e.g. CY / SY), Pliable Wire Armour (PWA), Steel Tape Armour (STA), Strip Armour (e.g. ASA)
Detachable Resin Tube / Cone & AnyWay Universal Clamping Ring
Unique CMP ‘LRS’ Outer Seal (Load Retention Seal)
Inner RapidEx Barrier Seal & Outer Sheath

Note : * Mechanical & Electrical Classifications applied as per IEC 62444 & EN 62444
** Refer to Maintaining a Seal for further information on Ingress Protection Ratings
***Where the cable is permitted by code (NEC and/or CEC)

Certificates

Нажмите здесь to view Certificates

Таблица выбора продукции

Нажмите здесь чтобы ознакомиться с технической иллюстрацией

Техническая иллюстрация

Нажмите здесь чтобы просмотреть информацию о заказе

Cable Gland SizeAvailable Entry Threads “"C”" (Alternate Metric Thread Lengths Available)Number of CoresDiameter Over Conductors
“"A”"
Cable Bedding Diameter “"G”"Overall
Cable
Diameter
“"B”"
Armour Range †Across
Flats
“"D"”
Across
Corners
“"D”"
Protrusion
Length “"F"”
Combined Ordering Reference
(*Brass Metric)
ShroudCable
Gland
Weight
(Ozs)
StandardOptionGrooved
Cone (X)
Stepped Cone (W)
MetricThread Length (Metric) “"E”"NPTThread Length
(NPT) “"E”"
NPTMaxMaxMaxMinMaxMinMaxMinMaxMaxMaxSizeTypeOrdering
Suffix
20s16M200.5911/2”"0.7833/4”"210.4610.4610.2400.5160.0120.0390.0310.0491.2011.3232.44120S16PX2KREX1RAPVC068.466
20SM200.5911/2”"0.7833/4”"210.4610.4610.3740.6260.0120.0390.0310.0491.2011.3232.44120SPX2KREX1RAPVC068.113
20M200.5911/2”"0.7833/4”"210.4960.5080.4920.8230.0160.0390.0310.0491.2011.3232.48020PX2KREX1RAPVC068.466
25SM250.5913/4”"0.7951”"300.6890.7050.5510.8660.0160.0470.0490.0631.4761.6262.73625SPX2KREX1RAPVC0913.051
25M250.5913/4”"0.7951”"300.6890.7050.7171.0310.0160.0470.0490.0631.4761.6262.73625PX2KREX1RAPVC0913.051
32M320.5911”"0.9841 1/4”"500.9290.9410.9331.3350.0160.0470.0630.0791.8111.9922.95332PX2KREX1RAPVC1120.106
40M400.5911 1/4”"1.0081 1/2”"591.1811.1931.0981.5910.0160.0630.0630.0792.1652.3822.95340PX2KREX1RAPVC1528.219
50SM500.5911 1/2”"1.0282”"891.4411.4531.3861.8390.0160.0630.0790.0982.3622.5983.03150SPX2KREX1RAPVC1831.747
50M500.5912”"1.0592 1/2”"1151.6141.6261.5912.0870.0240.0630.0790.0982.7563.0313.03150PX2KREX1RAPVC2141.976
63SM630.5912”"1.0592 1/2”"1151.8861.9061.7952.3390.0240.0630.0790.0982.9533.2483.13863SPX2KREX1RAPVC2349.031
63M630.5912 1/2”"1.5713”"1152.1142.1262.1502.5910.0240.0630.0790.0983.1503.4653.16163PX2KREX1RAPVC2549.736
75SM750.5912 1/2”"1.5713”"1402.3582.3702.3232.8350.0240.0630.0790.0983.5433.8983.41775SPX2KREX1RAPVC2873.723
75M750.5913”"1.6343 1/2”"1402.5282.5282.6263.0870.0240.0630.0980.1183.9374.3313.47675PX2KREX1RAPVC3089.596
90M900.9453 1/2”"1.6854”"1402.9652.9763.0003.5550.0310.0630.1240.1574.5284.9804.02090PX2KREX1RAPVC32130.867
100M1000.9453 1/2”"1.6854”"2003.3703.3823.3903.9920.0310.0630.1240.1575.0005.5004.488100PX2KREX1RALSF33169.668
Dimensions are displayed in inches unless otherwise stated
Cable Gland SizeAvailable Entry Threads “"C”" (Alternate Metric Thread Lengths Available)Number of CoresDiameter Over Conductors
"“A”"
Cable Bedding Diameter "G"”Overall
Cable
Diameter
“"B”"
Armour Range †Across
Flats
“"D”"
Across
Corners
“"D”"
Protrusion
Length “"F”"
Combined Ordering Reference
(*Brass Metric)
ShroudCable
Gland
Weight
(Kgs)
StandardOptionGrooved
Cone (X)
Stepped Cone (W)
MetricThread Length (Metric) “"E”"NPTThread Length
(NPT) “"E”"
NPTMaxMaxMaxMinMaxMinMaxMinMaxMaxMaxSizeTypeOrdering
Suffix
20s16M2015.01/2”"19.93/4”"2111.711.76.113.10.31.00.81.2530.533.662.020S16PX2KREX1RAPVC060.24
20SM2015.01/2”"19.93/4”"2111.711.79.515.90.31.00.81.2530.533.662.020SPX2KREX1RAPVC060.23
20M2015.01/2”"19.93/4”"2112.612.912.520.90.41.00.81.2530.533.663.020PX2KREX1RAPVC060.24
25SM2515.03/4”"20.21”"3017.517.914.022.00.41.21.251.637.541.369.525SPX2KREX1RAPVC090.37
25M2515.03/4”"20.21”"3017.517.918.226.20.41.21.251.637.541.369.525PX2KREX1RAPVC090.37
32M3215.01”"25.01 1/4”"5023.623.923.733.90.41.21.62.046.050.675.032PX2KREX1RAPVC110.57
40M4015.01 1/4”"25.61 1/2”"5930.030.327.940.40.41.61.62.055.060.575.040PX2KREX1RAPVC150.80
50SM5015.01 1/2”"26.12”"8936.636.935.246.70.41.62.02.560.066.077.050SPX2KREX1RAPVC180.90
50M5015.02”"26.92 1/2”"11541.041.340.453.00.61.62.02.570.077.077.050PX2KREX1RAPVC211.19
63SM6315.02”"26.92 1/2”"11547.948.445.659.40.61.62.02.575.082.579.763SPX2KREX1RAPVC231.39
63M6315.02 1/2”"39.93”"11553.754.054.665.80.61.62.02.580.088.080.363PX2KREX1RAPVC251.41
75SM7515.02 1/2”"39.93”"14059.960.259.072.00.61.62.02.590.099.086.875SPX2KREX1RAPVC282.09
75M7515.03”"41.53 1/2”"14064.264.266.778.40.61.62.53.0100.0110.088.375PX2KREX1RAPVC302.54
90M9024.03 1/2”"42.84”"14075.375.676.290.30.81.63.154.0115.0126.5102.190PX2KREX1RAPVC323.71
100M10024.03 1/2"42.84”"20085.685.986.1101.40.81.63.154.0127.0139.7114.0100PX2KREX1RALSF334.81
Dimensions are displayed in millimetres unless otherwise stated