EN RU CN

Воспользуйтесь нашим инструментом для поиска

Наш инструмент расширенного поиска позволяет найти продукцию, в точности соответствующую вашим требованиям.

оронавирус COVID–19: Информация для клиентов касательно коронавируса COVID-19

PX2KX-US | Class I, Div 1 & 2 | AEx e, AEx d, AEx nR, AEx ta | Hazardous Location Barrier Cable GlandFor all types of Braid & Tape Armoured Cables

Globally Approved, Hazardous (Classified) Location Barrier Cable Gland

• Metal-to-metal armour clamping
• Direct & remote installation
• Integral protected deluge seal
• Compound barrier type flameproof seal
• Controlled outer ‘load retention’ seal
• Unique OSTG prevents overtightening
• Integral protected deluge seal
• Disconnectable, union feature design
• -76˚F to 185˚F
• Globally marked, UL, cCSAus, IECEx & ATEX
• EMC tested
• As standard in nickel plated brass with NPT thread form

† Grooved Cone (X) is predominantly used for Wire Braid (e.g. GSWB, TCWB), Steel Tape Armour (STA, DSTA) and Aluminium Strip Armour (ASA) but is also suitable for Single Wire Armour (SWA), Aluminium Wire Armour (AWA) and Pliable Wire Armour (PWA) if the range is outside that of the Stepped Cone (W).

Note: Grooved Cone (X) dimensions shown in the Cable Gland Selection Table below are for a double wire strand of braid armour cables. Tapes can also be doubled over. For cables that have only a single layer of armour such as SWA the clamping range should be used as shown in the table below.

BS 6121:Part 1:1989, IEC 62444, EN 62444
Impact = Level 8, Retention = Class B
IK10 to IEC 62262 (20 joules) Brass & Stainless Steel only
Category B (Category A when used with braid, tape or pliable wire armour cables)
CML 18ATEX1325X, CML 18ATEX4317X
II 2G, II 1D, Ex d IIC Gb, Ex e IIC Gb, Ex ta IIIC Da,
II 3G Ex nR IIC Gc, IM2 Ex d I Mb, Ex e I Mb
EN 60079-0,1,7,15,31
IECEx CML 18.0182X
Ex d IIC Gb, Ex e IIC Gb, Ex nR IIC Gc, Ex ta IIIC Da, Ex d I, Ex e I
IEC 60079-0,1,7,15,31
2288626
Class I, Div. 1, 2 Groups A, B, C and D; Class II, Div. 1, 2 Groups E, F and G; Class III, Div. 1, 2; Type
4X: Oil Resistant II:
Class I, Zone 1 AEx d IIC Gb, AEx e IIC Gb, Class I, Zone 2 AEx nR IIC Gc,
Class I, Zone 20 AEx ta IIIC Da
Class I, Div. 1, 2 Groups A, B, C and D; Class II, Div. 1, 2 Groups E, F and G; Class III, Div. 1, 2; Type
4X: Oil Resistant II:
Ex d IIC Gb, Ex e IIC Gb, Ex nR IIC Gc, Ex ta IIIC Da
CAN/CSA-C22.2 No 0,18,25,30,94,174, CAN/CSA-E60079-0,1,7,15,31 CAN/
CSA-E61241-1-1 Part 1-1, ANSI/UL 514B Ed 5, ANSI/UL 50 Ed 11, ANSI/UL 2225 Ed 4,
UL60079
E201187, E161256C
Class I Div 1,2, Groups A,B,C,D, Class II Div 1,2, Groups E,F,G
UL 2225, CSA C22.2 No 174, UK 514B, CSA C22.2 No 18, CSA C22.2 No 30
TC RU C-GB.ГБ05.B00138
UA.TR.047.C.0644-15
P444949
GYJ13.1140X, GYJ13.1282X
TÜV 12.2073X
03866
LRS: 01/00172 (E3), DNV: E-13848, ABS: 14-LD234401A-4-PDA
IP66, IP67 & IP68
DTS01 : 91
NEMA 4X**
Electroless Nickel Plated Brass, Copper Free (<0.4%) Aluminium, Stainless Steel
CMP SOLO LSF Halogen Free Thermoset Elastomer / Epoxy Barrier Compound
Braid Armoured Shipboard cable and all IEC Braid Cables***
Detachable Compound Tube / Cone & AnyWay Universal Clamping Ring
Unique CMP ‘LRS’ Outer Seal (Load Retention Seal)
Inner Compound Barrier & Outer Sheath

Note : * Mechanical & Electrical Classifications applied as per IEC 62444 & EN 62444
** Refer to Maintaining a Seal for further information on Ingress Protection Ratings
***Where the cable is permitted by code (NEC and/or CEC)

Certificates

Нажмите здесь to view Certificates

Таблица выбора продукции

Нажмите здесь чтобы ознакомиться с технической иллюстрацией

Техническая иллюстрация

Нажмите здесь чтобы просмотреть информацию о заказе

Cable Gland SizeAvailable Entry Threads “"C”" (Alternate Metric Thread Lengths Available)Number of CoresDiameter Over Conductors
"“A”"
Cable
Bedding
Diameter
“"G”"
Overall
Cable
Diameter
“"B”"
Armour Range ††
Grooved Cone (X)
Across
Flats
"“D”"
Across
Corners
“"D”"
Protrusion
Length “"F"”
Combined Ordering Reference
(*Nickel Plated Brass NPT)
ShroudCable
Gland
Weight
(Ozs)
Standard
NPTNPT (Option)Metric (Option)Thread Length
(NPT) "“E”"
MaxMaxMaxMinMaxMinMaxMaxMaxSizeTypeOrdering
Suffix
20S161/2”"3/4”"M200.78110.460.460.240.520.010.041.201.322.4420S16PX2KX1RA531PVC068.47
20S1/2”"3/4”"M200.78110.460.460.370.630.010.041.201.322.4420SPX2KX1RA531PVC068.11
201/2”"3/4”"M200.78110.500.510.490.820.020.041.201.322.4820PX2KX1RA531PVC068.47
25S3/4”"1”"M250.80210.690.700.550.870.020.051.481.622.7425SPX2KX1RA532PVC0913.05
253/4”"1”"M250.80210.690.700.721.030.020.051.481.622.7425PX2KX1RA532PVC0913.05
321”"1 1/4”"M320.98380.930.940.931.340.020.051.811.992.9532PX2KX1RA533PVC1120.11
401 1/4”"1 1/2”"M401.01591.181.191.101.590.020.062.172.382.9540PX2KX1RA534PVC1528.22
50S1 1/2"”2”"M501.03891.441.451.391.840.020.062.362.603.0350SPX2KX1RA535PVC1831.75
502”"2 1/2”"M501.06891.611.631.592.090.020.062.763.033.0350PX2KX1RA536PVC2141.98
63S2”"2 1/2”"M631.061151.891.911.802.340.020.062.953.253.1463SPX2KX1RA536PVC2349.03
632 1/2”"3”"M631.571152.112.132.152.590.020.063.153.473.1663PX2KX1RA537PVC2549.74
75S2 1/2”"3”"M751.571402.362.372.322.840.020.063.543.903.4275SPX2KX1RA537PVC2873.72
753”"3 1/2”"M751.631402.532.532.633.090.020.063.944.333.4875PX2KX1RA538PVC3089.60
903 1/2”"4”"M901.692002.972.983.003.560.030.064.534.984.0290PX2KX1RA539PVC32130.87
1003 1/2"4”"M1001.692003.373.383.393.990.030.065.005.504.49100PX2KX1RA5310LSF33169.67
Dimensions are displayed in inches unless otherwise stated
Cable Gland SizeAvailable Entry Threads “"C”" (Alternate Metric Thread Lengths Available)Number of CoresDiameter Over Conductors
"“A"”
Cable Bedding Diameter "“G"Overall
Cable
Diameter
"“B"”
Armour Range † †
Grooved Cone (X)
Across Flats
“"D”"
Across Corners
"D”"
Protrusion
Length “"F"”
Combined Ordering Reference
(*Nickel Plated Brass NPT)
ShroudCable
Gland
Weight
(Kgs)
NPTNPT (Option)Metric (Option)Thread Length
(NPT) “E”
MaxMinMaxMinMaxMaxMaxSizeTypeOrdering
Suffix
20S161/2”"3/4"”M2019.91111.711.76.113.10.31.030.533.662.020S16PX2KX1RAPVC060.24
20S1/2”"3/4”"M2019.91111.711.79.515.90.31.030.533.662.020SPX2KX1RAPVC060.23
201/2”"3/4”"M2019.91112.612.912.520.90.41.030.533.663.020PX2KX1RAPVC060.24
25S3/4”"1”"M2520.22117.517.914.022.00.41.237.541.369.525SPX2KX1RAPVC090.37
253/4”"1”"M2520.22117.517.918.226.20.41.237.541.369.525PX2KX1RAPVC090.37
321”"1 1/4”"M3225.03823.623.923.733.90.41.246.050.675.032PX2KX1RAPVC110.57
401 1/4”"1 1/2”"M4025.65930.030.327.940.40.41.655.060.575.040PX2KX1RAPVC150.80
50S1 1/2”"2”"M5026.18936.636.935.246.70.41.660.066.077.050SPX2KX1RAPVC180.90
502”"2 1/2”"M5026.98941.041.340.453.00.61.670.077.077.050PX2KX1RAPVC211.19
63S2”"2 1/2”"M6326.911547.948.445.659.40.61.675.082.579.763SPX2KX1RAPVC231.39
632 1/2”"3”"M6339.911553.754.054.665.80.61.680.088.080.363PX2KX1RAPVC251.41
75S2 1/2”"3”"M7539.914059.960.259.072.00.61.690.099.086.875SPX2KX1RAPVC282.09
753”"3 1/2”"M7541.514064.264.266.778.40.61.6100.0110.088.375PX2KX1RAPVC302.54
903 1/2”"4”"M9042.820075.375.676.290.30.81.6115.0126.5102.190PX2KX1RAPVC323.71
1003 1/2"4”"M10044.020085.685.986.1101.40.81.6127.0139.7114.0100PX2KX1RALSF334.31
Dimensions are displayed in millimeters unless otherwise stated