EN RU CN

Воспользуйтесь нашим инструментом для поиска

Наш инструмент расширенного поиска позволяет найти продукцию, в точности соответствующую вашим требованиям.

оронавирус COVID–19: Информация для клиентов касательно коронавируса COVID-19

E2FX | Ex e, Ex d, Ex nR, Ex ta | Explosive Atmosphere Cable GlandFor Lead Sheathed Braided & Steel Tape Armoured cables

Internationally Approved, Explosive Atmosphere Cable Gland

• Effectively earths / grounds lead sheathed cables
• Metal-to-metal armour clamping
• Direct & remote installation
• Displacement type flameproof inner seal
• Controlled outer ‘load retention’ seal
• Unique OSTG prevents overtightening
• Designed to prevent Coldflow
• -60˚C to +130˚C
• Class I Zone 1, 21 and Zone 2, 22 Class I Division 2 ABCD
• Globally marked, IECEx, ATEX & cCSAus
• EMC tested

Note: † Grooved Cone (X) is predominantly used for Wire Braid (e.g. GSWB, TCWB), Steel Tape Armour (STA, DSTA) and Aluminium Strip Armour (ASA) but is also suitable for Single Wire Armour (SWA),
Aluminium Wire Armour (AWA) and Pliable Wire Armour (PWA) if the range is outside that of the Stepped Cone (W).

Note: Grooved Cone (X) dimensions shown in the Cable Gland Selection Table below are for a double wire strand of braid armour cables. Tapes can also be doubled over. For cables that have only a
single layer of armour such as SWA the clamping range should be used as shown in the table below.

BS 6121:Part 1:1989, IEC 62444, EN 62444
Impact = Level 8, Retention = Class B
IK10 to IEC 62262 (20 joules) Brass & Stainless Steel only
Category B (Category A when used with braid, tape or pliable wire armour cables)
CML 18ATEX1324X, CML 18ATEX4316X
II 2G, II 1D, Ex d IIC Gb, Ex e IIC Gb, Ex ta IIIC Da
II 3G Ex nR IIC Gc, IM2 Ex d I Mb, Ex e I Mb
EN 60079-0,1,7,15,31
IECEx CML 18.0181X, IECEx SIM 14.0007X
Ex d IIC Gb, Ex e IIC Gb, Ex nR IIC Gc, Ex ta IIIC Da, Ex d I Mb, Ex e I Mb
IEC 60079-0,1,7,15,31
1310517
Ex d IIC; Ex e II; Ex nR II; Class I, Div 2, Groups A,B,C,D, Class II, Div 2 Groups E,F,G,
Class III; Encl Type 4X Class I, Zone 1, AEx e II / AEx nR II
CAN/CSA-C22.2 No 0,18,25,30,174,94, CAN/CSA-E60079-0,1,7,15
ANSI/UL 514B Ed 5, ANSI/UL 50 Ed 11, ANSI/UL 2225 Ed 4, UL60079-0,1,7,15
TC RU C-GB.ГБ05.B00138
14-GA4BO-0257X
P444949
GYJ13.1140X , GYJ13.1282X
TÜV 12.0618X
03866
LRS: 01/00172 (E3), DNV: E-13848, ABS: 14-LD234401A-4-PDA
IP66 as standard (IP67, IP68 available upon request)
DTS01:91 option available on request (white ferrule for identification purposes)
Brass, Electroless Nickel Plated Brass, Aluminium
CMP SOLO LSF Halogen Free Thermoset Elastomer
Lead Sheathed & Wire Braid Armour (LC/SWB), Lead Sheathed & Pliable Wire Armour
(LC/PWA), Lead Sheathed & Steel Tape Armour (LC/STA), Lead Sheathed & Strip Armour
(LC/ASA)
Detachable Armour Cone & AnyWay Universal Clamping Ring
CMP Inner Displacement Seal & Unique CMP ‘LRS’ ™ Outer Load Retention Seal
Cable Inner Bedding & Outer Cable Sheath

Note : * Mechanical & Electrical Classifications applied as per IEC 62444 & EN 62444
** Refer to Maintaining a Seal for further information on Ingress Protection Ratings

Certificates

Нажмите здесь to view Certificates

Таблица выбора продукции

Нажмите здесь чтобы ознакомиться с технической иллюстрацией

Техническая иллюстрация

Нажмите здесь чтобы просмотреть информацию о заказе

Cable Gland SizeAvailable Entry Threads "“C" (Alternate Metric Thread Lengths Available)Lead Sheath Diameter “"A”"Overall
Cable
Diameter
“"B”"
Armour Range †
Grooved Cone (X)
Across
Flats
"“D”"
Across
Corners
“"D”"
Protrusion
Length "“F”"
Combined Ordering Reference
(*Brass Metric)
ShroudCable
Gland
Weight
(Ozs)
StandardOption
MetricThread Length (Metric) "“E"”NPTThread Length
(NPT) "“E"”
NPTMinMaxMinMaxMinMaxMaxMaxSizeTypeOrdering
Suffix
20s16M200.5911/2”"0.7833/4”"0.1220.3070.2400.5160.0120.0390.9451.0392.85420S16E2FX1RAPVC045.644
20SM200.5911/2”"0.7833/4”"0.2400.4330.3740.6260.0120.0390.9451.0392.75620SE2FX1RAPVC045.291
20M200.5911/2”"0.7833/4”"0.2560.5280.4920.8230.0160.0391.2011.3232.87420E2FX1RAPVC067.408
25SM250.5913/4”"0.7951”"0.4370.7600.5510.8660.0160.0471.4761.6263.50425SE2FX1RAPVC0911.640
25M250.5913/4”"0.7951”"0.4370.7600.7171.0310.0160.0471.4761.6263.50425E2FX1RAPVC0911.640
32M320.5911”"0.9841 1/4”"0.6691.0040.9331.3350.0160.0471.8111.9923.38632E2FX1RAPVC1115.168
40M400.5911 1/4”"1.0081 1/2”"0.8661.2281.0981.5910.0160.0632.1652.3823.54340E2FX1RAPVC1522.223
50SM500.5911 1/2”"1.0282”"1.1611.4651.3861.8390.0160.0632.3622.5983.58350SE2FX1RAPVC1826.808
50M500.5912”"1.0592 1/2”"1.4021.6771.5912.0870.0240.0632.7603.0353.74050E2FX1RAPVC2133.510
63SM630.5912”"1.0592 1/2”"1.5791.9091.7952.3390.0240.0632.9533.2484.01663SE2FX1RAPVC2347.620
63M630.5912 1/2”"1.5713”"1.8582.1342.1502.5910.0240.0633.1503.4654.09463E2FX1RAPVC2568.784
75SM750.5912 1/2”"1.5713”"2.0792.3702.3232.8350.0240.0633.5433.8984.52875SE2FX1RAPVC2874.781
75M750.5913”"1.6343 1/2”"2.3272.5672.6263.0870.0240.0633.9374.3314.60675E2FX1RAPVC3085.716
90M900.9453 1/2”"1.6854”"2.6223.0353.0003.5550.0310.0634.5004.9375.78790E2FX1RAPVC32149.209
100M1000.9453 1/2"1.6854”"2.9923.4693.3903.9920.0310.0634.8435.3275.512100E2FX1RALSF33157.675
115M1150.9454”"1.7325”"3.3863.7053.9964.3390.0310.0635.2525.7766.378115E2FX1RALSF34219.404
130M1300.9455”"1.8436”"3.8194.3354.3394.8500.0310.0636.0006.5986.850130E2FX1RALSF35295.596
Dimensions are displayed in inches unless otherwise stated
Cable Gland SizeAvailable Entry Threads “"C”" (Alternate Metric Thread Lengths Available)Lead Sheath Diameter “"A"”Overall
Cable
Diameter
“"B”"
Armour Range †
Grooved Cone (X)
Across
Flats
“"D”"
Across
Corners
"“D”"
Protrusion
Length “"F”"
Combined Ordering Reference
(*Brass Metric)
ShroudCable
Gland
Weight
(Kgs)
StandardOption
MetricThread Length (Metric) “"E"”NPTThread Length
(NPT) “"E”"
NPTMinMaxMinMaxMinMaxMaxMaxSizeTypeOrdering
Suffix
20s16M2015.01/2”"19.93/4”"3.17.86.113.10.31.024.026.472.520S16E2FX1RAPVC040.16
20SM2015.01/2”"19.93/4”"6.111.09.515.90.31.024.026.470.020SE2FX1RAPVC040.15
20M2015.01/2”"19.93/4”"6.513.412.520.90.41.030.533.673.020E2FX1RAPVC060.21
25SM2515.03/4”"20.21”"11.119.314.022.00.41.237.541.389.025SE2FX1RAPVC090.33
25M2515.03/4”"20.21”"11.119.318.226.20.41.237.541.389.025E2FX1RAPVC090.33
32M3215.01”"25.01 1/4”"17.025.523.733.90.41.246.050.686.032E2FX1RAPVC110.43
40M4015.01 1/4”"25.61 1/2”"22.031.227.940.40.41.655.060.590.040E2FX1RAPVC150.63
50SM5015.01 1/2”"26.12”"29.537.235.246.70.41.660.066.091.050SE2FX1RAPVC180.76
50M5015.02”"26.92 1/2”"35.642.640.453.00.61.670.177.195.050E2FX1RAPVC210.95
63SM6315.02”"26.92 1/2”"40.148.545.659.40.61.675.082.5102.063SE2FX1RAPVC231.35
63M6315.02 1/2”"39.93”"47.254.254.665.80.61.680.088.0104.063E2FX1RAPVC251.95
75SM7515.02 1/2”"39.93”"52.860.259.072.00.61.690.099.0115.075SE2FX1RAPVC282.12
75M7515.03”"41.53 1/2”"59.165.266.778.40.61.6100.0110.0117.075E2FX1RAPVC302.43
90M9024.03 1/2”"42.84”"66.677.176.290.30.81.6114.3125.4147.090E2FX1RAPVC324.23
100M10024.03 1/2"42.84”"76.088.186.1101.40.81.6123.0135.3140.0100E2FX1RALSF334.47
115M11524.04”"44.05”"86.094.1101.5110.20.81.6133.4146.7162.0115E2FX1RALSF346.22
130M13024.05”"46.86”"97.0110.1110.2123.20.81.6152.4167.6174.0130E2FX1RALSF358.38
Dimensions are displayed in millimetres unless otherwise stated