Воспользуйтесь нашим инструментом для поиска

Наш инструмент расширенного поиска позволяет найти продукцию, в точности соответствующую вашим требованиям.

Выберите один или несколько фильтров Закрыть [ X ]

Профессионалы в сфере проектирования и изготовления кабельных вводов, кабельных скоб и аксессуаров

Позвонить нам

оронавирус COVID–19: Информация для клиентов касательно коронавируса COVID-19

Хотите узнать больше об этом изделии у технического специалиста CMP? Позвоните одному из них прямо сейчас по телефону

CX | Industrial Cable GlandFor Braid, Pliable Wire & Steel Tape Armoured Cables

Узнать больше о
данном изделии

Описание

Технические сведения

Single Seal Industrial Cable Gland

• High quality durable materials
• Robust, heavy duty design
• Metal-to-metal armour clamping
• Direct & remote installation
• Controlled outer ‘load retention’ seal
• Unique OSTG prevents overtightening
• -60˚C to +130˚C (standard), -20˚C to 200˚C (ThermIn option CXHT)
• Deluge protection option
• EMC tested

† Grooved Cone (X) is predominantly used for Wire Braid (e.g. GSWB, TCWB), Steel Tape Armour (STA, DSTA) and Aluminium Strip Armour (ASA) but is also suitable for Single Wire Armour (SWA), Aluminium Wire Armour (AWA) and Pliable Wire Armour (PWA) if the range is outside that of the Stepped Cone (W).

Note: Grooved Cone (X) dimensions shown in the Cable Gland Selection Table below are for a double wire strand of braid armour cables. Tapes can also be doubled over. For cables that have only a single layer of armour such as SWA the clamping range should be used as shown in the table below

	BS 6121:Part 1:1989, IEC 62444, EN 62444
	Impact = Level 8, Retention = Class D
	IK10 to IEC 62262 (20 joules) Brass & Stainless Steel only
	Category A
	POCC GB.ГБ05.H00187
	LRS: 01/00171 (E1), ABS: 16-LD1472056-PDA
	IP66 as standard (IP67, IP68 available upon request)
	Brass, Electroless Nickel Plated Brass, Stainless Steel, Aluminium
	CMP Thermoset Rubber
	Wire Braid Armour, Screened Flexible (EMC) Wire Braid (e.g. CY / SY), Pliable Wire Armour (PWA), Steel Tape Armour (STA)
	Detachable Armour Cone & AnyWay Universal Clamping Ring
	Unique CMP ‘LRS’ Outer Seal (Load Retention Seal)
	Cable Outer Sheath
	Cable Gland kit for use with all types of cable includes 2 Brass Cable Glands, 2 Steel Locknuts, 2 Brass Earth Tags and 2 PVC Shrouds for sizes up to and including 32mm. For sizes 40mm and above each kit includes 1 of each component.

Note : * Mechanical & Electrical Classifications applied as per IEC 62444 & EN 62444
** Refer to Maintaining a Seal for further information on Ingress Protection Ratings

Certificates

Таблица выбора продукции

Нажмите здесь чтобы ознакомиться с технической иллюстрацией

Техническая иллюстрация

Нажмите здесь чтобы просмотреть информацию о заказе

На изображении:

Cable Gland Size	Available Entry Threads "C" (Alternate Metric Thread Lengths Available)		Cable Bedding Diameter "A"	Overall Cable Diameter "B"		Armour Range † Grooved Cone (X)		Across Flats "D"	Across Corners "D"	Protrusion Length "F"	Combined Ordering Reference (Brass Metric)			Shroud	Cable Gland Weight (Ozs)
			Cable Bedding Diameter "A"	Overall Cable Diameter "B"		Armour Range † Grooved Cone (X)		Across Flats "D"	Across Corners "D"	Protrusion Length "F"	Combined Ordering Reference (Brass Metric)
	Metric	Thread Length (Metric) "E"	Max	Min	Max	Min	Max	Max	Max		Size	Type	Ordering Suffix
20S16	M20	0.394	0.343	0.240	0.516	0.012	0.039	0.945	1.039	1.890	20S16	CX	1RA	PVC04	3.527
20S	M20	0.394	0.461	0.374	0.626	0.012	0.039	0.945	1.039	1.890	20S	CX	1RA	PVC04	3.527
20	M20	0.394	0.551	0.492	0.823	0.016	0.039	1.201	1.323	1.890	20	CX	1RA	PVC06	5.185
25S	M25	0.394	0.787	0.551	0.866	0.016	0.047	1.476	1.626	2.205	25S	CX	1RA	PVC09	7.901
25	M25	0.394	0.787	0.717	1.031	0.016	0.047	1.476	1.626	2.205	25	CX	1RA	PVC09	7.796
32	M32	0.394	1.035	0.933	1.335	0.016	0.047	1.811	1.992	2.126	32	CX	1RA	PVC11	10.794
40	M40	0.591	1.268	1.098	1.591	0.016	0.063	2.165	2.382	2.283	40	CX	1RA	PVC15	15.803
50S	M50	0.591	1.504	1.386	1.839	0.016	0.063	2.362	2.598	2.402	50S	CX	1RA	PVC18	20.000
50	M50	0.591	1.736	1.591	2.087	0.024	0.063	2.760	3.035	2.362	50	CX	1RA	PVC21	26.491
63S	M63	0.591	1.969	1.795	2.339	0.024	0.063	2.953	3.248	2.913	63S	CX	1RA	PVC23	36.544
63	M63	0.591	2.205	2.150	2.591	0.024	0.063	3.150	3.465	2.795	63	CX	1RA	PVC25	35.838
75S	M75	0.591	2.441	2.323	2.835	0.024	0.063	3.543	3.898	3.386	75S	CX	1RA	PVC28	63.035
75	M75	0.591	2.677	2.626	3.087	0.024	0.063	3.937	4.331	3.228	75	CX	1RA	PVC30	73.758
90	M90	0.945	3.150	3.000	3.555	0.031	0.063	4.500	4.949	3.740	90	CX	1RA	PVC32	107.374
100	M100	0.945	3.583	3.390	3.992	0.031	0.063	4.843	5.327	3.740	100	CX	1RA	LSF33	110.478
115	M115	0.945	3.858	3.996	4.339	0.031	0.063	5.252	5.776	4.232	115	CX	1RA	LSF34	157.886
130	M130	0.945	4.528	4.339	4.850	0.031	0.063	6.000	6.598	4.331	130	CX	1RA	LSF35	203.214

Cable Gland Size	Available Entry Threads "C" (Alternate Metric Thread Lengths Available)		Cable Bedding Diameter "A"	Overall Cable Diameter "B"		Armour Range † Grooved Cone (X)		Across Flats "D"	Across Corners "D"	Protrusion Length "F"	Combined Ordering Reference (Brass Metric)			Shroud	Cable Gland Weight (Kgs)
			Cable Bedding Diameter "A"	Overall Cable Diameter "B"		Armour Range † Grooved Cone (X)		Across Flats "D"	Across Corners "D"		Combined Ordering Reference (Brass Metric)
	Metric	Thread Length (Metric) "E"	Max	Min	Max	Min	Max	Max	Max		Size	Type	Ordering Suffix
20S16	M20	10.0	8.7	6.1	13.1	0.3	1.0	24.0	26.4	48.0	20S16	CX	1RA	PVC04	0.100
20S	M20	10.0	11.7	9.5	15.9	0.3	1.0	24.0	26.4	48.0	20S	CX	1RA	PVC04	0.100
20	M20	10.0	14.0	12.5	20.9	0.4	1.0	30.5	33.6	48.0	20	CX	1RA	PVC06	0.147
25S	M25	10.0	20.0	14.0	22.0	0.4	1.2	37.5	41.3	56.0	25S	CX	1RA	PVC09	0.224
25	M25	10.0	20.0	18.2	26.2	0.4	1.2	37.5	41.3	56.0	25	CX	1RA	PVC09	0.221
32	M32	10.0	26.3	23.7	33.9	0.4	1.2	46.0	50.6	54.0	32	CX	1RA	PVC11	0.306
40	M40	15.0	32.2	27.9	40.4	0.4	1.6	55.0	60.5	58.0	40	CX	1RA	PVC15	0.448
50S	M50	15.0	38.2	35.2	46.7	0.4	1.6	60.0	66.0	61.0	50S	CX	1RA	PVC18	0.567
50	M50	15.0	44.1	40.4	53.0	0.6	1.6	70.1	77.1	60.0	50	CX	1RA	PVC21	0.751
63S	M63	15.0	50.0	45.6	59.4	0.6	1.6	75.0	82.5	74.0	63S	CX	1RA	PVC23	1.036
63	M63	15.0	56.0	54.6	65.8	0.6	1.6	80.0	88.0	71.0	63	CX	1RA	PVC25	1.016
75S	M75	15.0	62.0	59.0	72.0	0.6	1.6	90.0	99.0	86.0	75S	CX	1RA	PVC28	1.787
75	M75	15.0	68.0	66.7	78.4	0.6	1.6	100.0	110.0	82.0	75	CX	1RA	PVC30	2.091
90	M90	24.0	80.0	76.2	90.3	0.8	1.6	114.3	125.7	95.0	90	CX	1RA	PVC32	3.044
100	M100	24.0	91.0	86.1	101.4	0.8	1.6	123.0	135.3	95.0	100	CX	1RA	LSF33	3.132
115	M115	24.0	98.0	101.5	110.2	0.8	1.6	133.4	146.7	107.5	115	CX	1RA	LSF34	4.476
130	M130	24.0	115.0	110.2	123.2	0.8	1.6	152.4	167.6	110.0	130	CX	1RA	LSF35	5.761