Наш инструмент расширенного поиска позволяет найти продукцию, в точности соответствующую вашим требованиям.
оронавирус COVID–19: Информация для клиентов касательно коронавируса COVID-19
оронавирус COVID–19: Информация для клиентов касательно коронавируса COVID-19
Specialist engineers at CMP have developed a number of tools that are best suited to installing our products in a safe and reliable manner and that avoid damage to material and equipment.
In particular we manufacture dedicated cable gland spanners, suitable for a range of sizes. These can be sourced from a CMP distributor or by clicking on ‘submit enquiry’ below. Adjustable spanners and wrenches are not recommended as there is a possibility of slippage that can lead to accidental injury or damage to the product or the surface finish.
We have also developed our own armour forming tool, which is suitable for armour wires of between 2.0-4.0mm. The tool makes preparing the armour wire for installation a far easier and much quicker process.
A typical range of tools required for installing cable glands is shown below. Please contact CMP if there are any installation tools that you would like us to source on your behalf:
Recommended to be worn when handling and terminating cables, in order to avoid personal injury.
Submit Enquiry
Enables cable size to be checked and recorded so that the Cable Gland size can be verified for each cable termination.
Submit Enquiry
Available from CMP Products and recommended for correctly installing the product.
Submit Enquiry
Enable the armour wires to be prepared for termination in the cable gland body.
Submit Enquiry
Or other similar tool, with the appropriate tooth profile, should be used to cut armour wires.
Submit Enquiry
This provides a guide as to the correct cable gland size and tightening required for
Submit Enquiry
Note, when cutting armour wires, care should be taken to avoid cutting into the inner cable bedding or insulation beneath the armour wires.
Submit Enquiry
Useful for removing unwanted or excess cable braid. Must be sharp enough to enable a first time clean cut of the cable braid without snagging
Submit Enquiry
