ConquerorRTSS cable cleat

CMP Products Conqueror cable cleats are metallic cable cleats which have been designed, constructed, and tested in accordance with the International Standard ‘cable cleats for Electrical Installations’ IEC 61914:2009. The Conqueror cable cleat has been designed to restrain a large cable range take, and tested for exceptionally high short circuit conditions on cables held in trefoil application / formation, to ensure the securing and retention of cables without damage.

Conqueror is unique with its patent pending adjustable hinge. The movement of this hinge virtually doubles the range take adjustment when compared to other fixed hinged products on the market. Conqueror covers a range of cable diameters from 19mm up to 130mm in only 16 sizes. The cable cleat is fabricated from 316L stainless steel, giving it high creep strength whilst providing excellent corrosion resistance in the harshest of environments.

The Conqueror cable cleat has one M12 and two M10 fixing clearance holes within its base, allowing versatility to the installer during installation, and is designed to enable the product to be secured to a variety of mounting surfaces. The cable cleat hinge opens fully, allowing the cables to be easily placed within the cable cleat, to aid the installer before closing and securing via the mouth piece bolt.

Low Smoke & Fume (LFS), Zero Halogen (LS0H) and Phosphorus Free liners are standard helping to restrain the cables within vertical applications, providing a layer of protection between the cable sheath and the cable cleat during normal operation, where thermal elongation of cable occurs, protecting the cable from chafing on any mounting surface due to differential movements such as those found in marine and offshore applications. The Low Smoke & Fume (LFS), Zero Halogen (LS0H) and Phosphorus Free liners also assist in the extra protection of cables in the event of short circuit fault conditions.

• Third party certification to IEC 61914:2009
• 316L stainless steel
• 19 – 130mm in 16 sizes for trefoil formation / application
• Short circuit rating of 170kA peak fault
• Operating temperature -50°C to +60°C
• Low Smoke & Fume (LFS), Zero Halogen (LS0H) and Phosphorus Free liners as standard
• Combined single (M12) and two bolt (M10) fixing design