747 | Recessed Stopper Plug Available in brass, nickel plated brass, aluminium, stainless steel & nylon

Recessed Stopper Plug, Globally Approved, Explosive Atmosphere Cable / Conduit Accessory

• Provides means of blanking unused cable entries
• Temporary or permanent
• Tamper-proof (Type B) version available
• General purpose / industrial version available
• Nylon Ex e only version available (-20°C to +60°C)
• -60°C to +200°C (metallic versions)
• Globally marked, IECEx, ATEX, cCSAus & UL
• For use with threaded entry holes only – for stopper plugs suitable for use in clearance/through holes, please see 757 or 767
• Nylon stopper 717 / 717e to be used for sizes M20, M25, M32, 1⁄2″, 3⁄4″ and 1″

Please note: 747 Stopper Plugs have passed IP66 compliance tests to IEC 60529 with no additional sealing. However CMP would recommend the addition of thread sealant or grease (such as Dow Corning No. 4 Silicone) in order to help maintain IP66 and keep water out of the enclosure in the long-term. The addition of thread sealant or grease is permitted as long as it is non-setting, non-metallic and non-combustible in compliance with IEC 60079-14.

DescriptionAllen Key RecessMetallicNon-Metallic
Ex 'd'Ex 'e'IndustrialEx 'e'Industrial
747 Recessed Non-Tamper Proof Type 'A'YYYYYY
747 Recessed Tamper Proof Type 'B'YYYYYY
757 Hexagon HeadNYYYYY
757 Hexagon Head c/w 'O' ring sealNYYYYY
767 Dome HeadYYYYYY
767 Dome Head c/w 'O' ring sealYYYYYY
717 UniversalYNNNYY

HOW TO ORDER
e.g. 747 – D – A – M – 3 – 1
= Dual Certified Ex d & Ex e- Type A – M25 – Aluminium

For Tamper-Proof Type B Stopper Plugs please substitute the letter A with the letter B in the ordering reference list below.

Other thread variations are available on request.

For further information on ordering please contact a member of the CMP team.

Design Specification BS 6121:Part 1:1989, IEC 62444, EN 62444
Enclosure Protection IK10 to IEC 62262 (20 joules) Brass & Stainless Steel Only
ATEX Certificate CML 18ATEX1320X
UKEX Certificate CML 21UKEX1238X
Code of Protection II 2G 1D Ex db IIC Gb, Ex eb IIC Gb, Ex ta IIIC Da
I M2 Ex db I Mb, Ex eb I Mb
(II 2G 1D Ex eb IIC Gb, Ex ta IIIC Da only on Nylon version)
Compliance Standards EN 60079-0,1,7, 31
IECEx Certificate IECEx CML 18.0177X, IECEx SIM 15.0002X
Code of Protection Ex db I Mb, Ex eb I Mb; Ex db IIC Gb, Ex eb IIC Gb, Ex ta IIIC Da
(Ex eb IIC Gb, Ex ta IIIC Da only on Nylon version)
Compliance Standards IEC 60079-0,1, 7, 31
cCSAus Certificate 1055233 (Metallic versions only)
Code of Protection Class I, Groups A, B, C and D; IP66, 67, 68, Enclosure Type 4X; Class II Groups E, F and G;
Class III Ex de II, Class I, Zone 1, AEx de II
Compliance Standards C22.2 No. 0, 0.5, 30,94,CAN/CSA 60079-0, 1, 7, UL50 Edition 11, UL1203 Edition 4,
UL 60079-0, 1, 7
UL Certificate E214221 (Metallic versions only)
Code of Protection Class I, Groups A,B,C, and D; Class II Groups E,F, and G; Class III
Compliance Standards UL 1203
EAC Certificate (Formerly GOST R, K & B) TC RU C-GB.AA87.B.00487
KCs Certificate 14-GA4BO-0247X
CCOE / PESO (India) Certificate Ex d: P548696, Ex e: P533772
CCC Certificate 2020322313001727
INMETRO Certificate TÜV 12.1333X
RETIE Approval 03866
UkrSEPRO CU 19.0372X
SANS MS-XPL21804 21.0006X
Marine Approvals LRS: 01/00173, DNV: TAE00000Y, ABS: 17-LD1619350-PDA, BV: 43180/A1BV
Continuous Operating Temperature -60°C to +200°C (Metallic), -20°C to +60°C (Nylon)
Ingress Protection Rating ** IP66
Available Materials Brass, Electroless Nickel Plated Brass, Aluminium, Stainless Steel, Nylon
ECAS Certificate 24-03-106290/E24-03-110155/NB0007

** When CMP installation accessories are used. Refer to Maintaining a Seal for further information.

Jump to technical illustration   

Certificates

Click here to view Certificates

Product Selection Table

Click here to view how to order

Ordering ReferenceThread SizeMinimum Thread LengthAllen Key Size A/F
747DAM1M16 X 1.50.59M8
747DAM2M20 X 1.50.59M10
747DAM3M25 X 1.50.59M10
747DAM4M32 X 1.50.59M10
747DAM5M40 X 1.50.59M10
747DAM6M50 X 1.50.59M10
747DAM7M63 X 1.50.59M14
747DAM8M75 X 1.50.59M14
747DAM9M90 X 2.00.94M14
747DAM10M100 x 2.00.94M14
Dimensions displayed in millimeters unless otherwise stated
Ordering ReferenceThread SizeMinimum Thread LengthAllen Key Size A/F
747DAM1M16 X 1.515.0M8
747DAM2M20 X 1.515.0M10
747DAM3M25 X 1.515.0M10
747DAM4M32 X 1.515.0M10
747DAM5M40 X 1.515.0M10
747DAM6M50 X 1.515.0M10
747DAM7M63 X 1.515.0M14
747DAM8M75 X 1.515.0M14
747DAM9M90 X 2.024.0M14
747DAM10M100 x 2.024.0M14
Dimensions displayed in millimeters unless otherwise stated
If a nylon stopper is required for sizes M20, M25, M32, 1⁄2", 3⁄4" and 1" please order717 or 717e.

Technical Illustration

Additional Information

ATEX Insights

Comprehensive information on the use and application of the Directive ATEX 2014/34/EU, which became mandatory on 20th April 2016 can be obtained from the europa.eu web resources. The third edition of the ATEX 2014/34/EU guidelines were issued in December 2017 and form an important reference point for member states to follow; they can be found here :  http://ec.europa.eu/DocsRoom/documents/41403/attachments/1/translations/

Read more

Material Differences

Read more

Material Differences

Read more

Visit our Knowledge Base for technical expertise and advice, gathered over CMP's 60+ years' experience in the art of terminating cable glands.

Sign up now