717e | Nylon Universal Stopper Plug | Ex e | Conduit Accessory For Explosive Atmospheres

  • Provides means of blanking unused cable entries
  • Cost effective moulded design
  • Universal tightening design (hex head, allen key and slotted/flat screw head)
  • Temporary or permanent
  • Available in blue for intrinsically safe circuits
  • Approved entry thread sealing washer available
  • +95°c to -60°c

Ex e colour options 

ColourSuffixMetric Ordering ExampleNPT Ordering Example
Black - RAL9011-717EM2717ET1
Blue - RAL50154717EM24717ET14
Ingress Protection Rating (Without Entry Thread Seal Fitted) IP66, IP67, IP68, IP69K
*Minimum IP68 depth and duration
1.1 metres for 16 hours**
Ingress Protection Rating (With Entry Thread Seal Fitted) IP66, IP67, IP68, IP69K
*Minimum IP68 depth and duration:
30 metres for 16 hours**
Available Materials Halogen-free polyamide
Continuous Operating Temperature +95°c to -60°c
ATEX Certificate CML 20ATEX3054X
UKEX Certificate CML 21UKEX3237X
Code of Protection II 2G 1D Ex eb IIC Gb,
Ex ta IIIC Da
Compliance Standards EN 60079-0, 7, 31
IECEx Certificate IECEx CML 20.0038X
Code of Protection Ex eb IIC Gb, Ex ta IIIC Da
Compliance Standards IEC 60079-0, 7, 31
EAC Certificate C-GB.A07.B.02495-20
ECAS Certificate 24-03-106290/E24-03-110155/NB0007

**Alternative depths/durations can be provided upon request

Certificates

ORDERING
REFERENCE
THREAD SIZEMINIMUM THREAD
LENGTH
ACROSS FLATSACROSS CORNERS
DIAMETER
PROTRUSION
LENGTH
717EM2M2010.024.026.37.0
717EM3M2510.028.030.7
7.0
717EM4M3210.038.041.78.0
All dimensions shown are in millimetres unless otherwise stated
Ordering reference shown for black metric product
Examples: 717EM2 = Black Nylon M20, 717EM24 = Blue Nylon M20
ORDERING
REFERENCE
THREAD SIZEMINIMUM THREAD
LENGTH
ACROSS FLATSACROSS CORNERS
DIAMETER
PROTRUSION
LENGTH
717ET11/2"14.024.026.37.0
717ET23/4"14.028.030.7
7.0
717ET31"14.038.041.78.0
All dimensions shown are in millimetres unless otherwise stated
Ordering reference shown for black imperial product
Examples: 717ET1 = Black Nylon 1/2", 717ET24 = Blue Nylon 3/4"
ORDERING
REFERENCE
THREAD SIZEMINIMUM THREAD
LENGTH
ACROSS FLATSACROSS CORNERS
DIAMETER
PROTRUSION
LENGTH
717EM2M200.390.941.040.28
717EM3M250.391.101.21
0.28
717EM4M320.391.501.640.31
All dimensions shown are in inches unless otherwise stated
Ordering reference shown for black metric product
Examples: 717EM2 = Black Nylon M20, 717EM24 = Blue Nylon M20
ORDERING
REFERENCE
THREAD SIZEMINIMUM THREAD
LENGTH
ACROSS FLATSACROSS CORNERS
DIAMETER
PROTRUSION
LENGTH
717ET11/2"0.550.941.040.28
717ET23/4"0.551.101.21
0.28
717ET31"0.551.501.640.31
All dimensions shown are in inches unless otherwise stated
Ordering reference shown for black imperial product
Examples: 717ET1 = Black Nylon 1/2", 717ET24 = Blue Nylon 3/4"